Industrial spray application guide
Pasteurization Spray Nozzles for Tunnel and Container Systems
Pasteurization spray nozzles distribute heating or cooling water over packaged products in tunnel and container systems. They support heat transfer and temperature uniformity, but validated time–temperature performance belongs to the complete process.
Engineering focus
What the spray system must accomplish
Uneven coverage, blocked nozzles or poor zone balance can create thermal variation. Food-contact materials, sanitation, 여과법, access and process validation must be considered together.
Inputs required before selection
- Product/container geometry and validated thermal process
- Zone temperatures, conveyor speed and recirculation flow
- Header layout, nozzle spacing and drainage
- Food-contact suitability, cleanability and filtration
- 연결, installation space and maintenance access
- Required documentation, test method and acceptance criteria
Comparison
Practical nozzle starting points
| Nozzle approach | 유용한 시작 조건 | What to verify |
|---|---|---|
| Full-cone spray | Broad three-dimensional container coverage | Verify overlap and shadowing |
| Flat-fan spray | Linear rows or controlled sheet coverage | Check alignment across conveyor width |
| Large-passage sanitary design | Recirculated water with fouling concern | Confirm hygienic access and cleanability |
Review method
How to move from requirement to a defensible selection
- Define the process envelope. Record normal, minimum, maximum and upset conditions rather than one nominal point.
- Choose the spray function. State whether the job is coverage, impact, atomization, evaporation, gas–liquid contact, washing or cooling.
- Check distribution in the real geometry. Review spacing, 겹치다, obstructions, wall contact, drainage and access.
- Validate materials and maintenance. Consider corrosion, erosion, solids, 여과법, cleaning and replacement intervals.
- Set an acceptance test. Use an observable measure such as coverage, 흐름, temperature profile, 압력, droplet data or process result.
Related applications
기술 참고자료
These sources define process or system context. Product suitability still requires project-specific engineering review.
- U.S. FDA — Pasteurization time/temperature guidance
- Spraying Systems Co. — Industrial spray application directory
Last technical review: 31 July 2026
RFQ checklist
Send the operating data, not just a nozzle name
Include the application, fluid, 흐름, 압력, 온도, spray distance, 연결, material preference, drawings and acceptance criteria.