Description
High-Pressure Needle Solid Stream Nozzle provides a shape and concentrated high-pressure spray jet. These nozzles offer a stronger impact force than other types at the same operating pressures and flow rates.
High-Pressure Needle Solid Stream Nozzle is used for cutting the edge of the paper. It has many characteristics such as precise and clean edge cutting. It can form a linear needle-shaped liquid column flow under different pressure conditions and can withstand pressures up to 140 bar. The material is 316 stainless steel and high alumina ceramic.
Advantages
- Professional industry spray nozzle with over 15 years of experience.
- Complete QC system and strong after-sales concept.
- 3 R&D Engineers with over 10 years of experience.
- ISO9001:2015/SGS/CE certification.
- Third-party audit.
- Fast delivery.
- Accept OEM/ODM
Specs
| Brand | Jeltecn |
| Nozzle Type | BB |
| Thread Size | 1/4” 1/8” |
| Spray Angle | 0° |
| Spray Pattern | Full Cone |
| Thread Type | BSPT, NPT, Male |
| Orifice Dia. (MM) | 0.38-1.5 |
| Water Pressure | 7bar-138bar |
| Capacity(L/M) | 0.171L-12.2L |
| Material | Stainless Steel/Brass |
| Packaging | Carton |
| Certificates | ISO9001/SGS/CE |
| Payment Terms | T/T, Western Union, Paypal |
Application
High-impact cleaning
Washing of crushed gravel
Washing of fruits and vegetables
Edge trimming in the paper industry
High-pressure swing cleaning of Fourdrinier wire, etc.
Performance Date
Solid Stream Spray Nozzle
Image
Jeltecn Factory
Certification
Cooperative Customers
Video
How to Select Ceramic-Core Solid Stream Nozzle
ceramic core solid stream nozzle uses a wear-resistant ceramic insert to maintain a concentrated jet in abrasive or high-duty service. This page should be evaluated as an engineered component: final performance depends on the liquid, pressure at the nozzle, installed geometry and the selected configuration.
Technical selection criteria
- Process fluid: identify composition, temperature, specific gravity, viscosity, suspended solids and any corrosion or erosion risk.
- Required duty: state flow per nozzle, minimum and maximum inlet pressure, operating cycle and acceptable turndown.
- Spray result: define pattern, angle, coverage width or diameter, stand-off distance, droplet requirement and allowable overspray.
- Installation: confirm thread standard, connection size, orientation, header spacing, available clearance and access for inspection.
- Materials and maintenance: match body, insert, seals and accessories to the fluid and environment; include filtration and cleaning requirements.
Where this nozzle type fits
Typical evaluation areas include high-impact cleaning, paper-machine service, trimming and localized wash-down. When comparing ceramic core solid stream nozzle with needle jet nozzle, wear-resistant jet nozzle, high-pressure cleaning nozzle, select the pattern and construction that solve the actual process duty. A wider angle does not automatically mean better atomization, and a higher pressure does not automatically deliver the best coverage.
Engineering limits and installation checks
Published flow and spray data are normally based on defined test liquids and conditions. Viscosity, specific gravity, pressure loss, solids, temperature, nozzle wear, pulsation and nearby airflow can change field performance. Confirm the installed pressure at the nozzle—not only pump discharge pressure—and verify overlap or target coverage before finalizing a production header.
Information to include with an RFQ
Provide liquid properties, target flow, pressure range, spray angle or coverage, distance to target, material, connection, quantity, duty cycle and installation drawings. Jeltecn can use these inputs to compare the requested configuration with related spray nozzle application guidance and the complete industrial spray nozzle range.
Frequently asked questions
What determines the flow of ceramic core solid stream nozzle?
Flow depends primarily on the selected orifice and pressure differential, then must be corrected for liquid density, viscosity and the actual piping losses.
How should this nozzle be validated before production use?
Confirm the exact model and material, review the performance table, test coverage under representative conditions and document inspection or replacement criteria.
ceramic core solid stream nozzle Selection Summary
A ceramic core solid stream nozzle should be selected from the required process result backward—not from connection size alone. Confirm the liquid, target flow, pressure available at the nozzle, spray geometry, material and service environment before choosing a model.
When specifying ceramic core solid stream nozzle, document the stand-off distance, coverage or impact requirement, duty cycle, filtration and maintenance access. The final ceramic core solid stream nozzle configuration should then be checked against representative operating conditions rather than a single catalogue point.
Related engineering terms include needle jet nozzle, wear-resistant jet nozzle, high-pressure cleaning nozzle. These terms may describe adjacent spray patterns or constructions, but they are not automatically interchangeable. For general definitions of full-cone, flat-spray, hollow-cone, fine-spray and air-atomizing patterns, see the Spraying Systems spray-pattern reference.
For a ceramic core solid stream nozzle quotation, include the required quantity, connection standard, material, operating range and a drawing or photo of the installation.
