Description
1/8 inch FE plastic fine misting nozzle is NPT or BSPT external thread, and the spray shape is the annular hollow cone.
FE plastic fine misting nozzle requires low pressure, and the pressure of ordinary tap water is about 3kg.
Plastic atomizing nozzles are generally made of glass fiber reinforced polypropylene plastic and can spray fine atomized particles of 20-40 microns, and the spray angle is 80-90 degrees.
The FE plastic fine misting nozzle has a filter inside, which is not easy to be blocked and also has an anti-drip design.
The material of FE plastic fine misting nozzle is made of plastic, and the cost of use is low.
FE plastic fine misting nozzle widely used in humidification, dust reduction, cooling, fogging, landscape, and other fields.
The plastic fine misting nozzle is very good in the field of artificial fogging. With Changyuan’s high-pressure micro-mist system, it is very suitable for humidification, air improvement, and artificial fogging in public places such as large squares and rockery landscapes. The artificial fog drifts with the wind and integrates with the natural environment, making the scenic spot more ornamental and interesting.
Advantages
- Professional industry spray nozzle with over 15 years of experience.
- Complete QC system and strong after-sales concept.
- 3 R&D Engineers with over 10 years of experience.
- ISO9001:2015/SGS/CE certification.
- Third-party audit.
- Fast delivery.
- Accept OEM/ODM
Specs
| Brand | Jeltecn |
| Nozzle Type | Plastic Nozzle |
| Thread Size | 1/8″ |
| Spray Angle | 80°-90° |
| Spray Pattern | Atomization |
| Thread Type | BSPT, NPT, Male, |
| Orifice Dia. (MM) | / |
| Water Pressure3 | 3bar-14bar |
| Capacity(L/H) | 1.6L-3.4L |
| Material | PP |
| Packaging | Carton |
| Certificates | ISO9001/SGS/CE |
| Payment Terms | T/T, Western Union, Paypal |
Application
■ Refrigeration House
■ Greenhouse
■ Livestock Production
■ Plant Nursery
■ Edible Fungi Cultivation
■ Fruit-Vegetable Cultivation
■ Electrostatic Prevention
■ Disinfection
■ Haze Injury Control
■ Dust Abatement
Application scenarios
Jeltecn Factory
Certification
Cooperative Customers
Video
How to Select FE Plastic Fine Misting Nozzle
plastic fine misting nozzle uses a corrosion-resistant plastic body and fine atomizing insert for light-duty fogging and humidification. This page should be evaluated as an engineered component: final performance depends on the liquid, pressure at the nozzle, installed geometry and the selected configuration.
Technical selection criteria
- Process fluid: identify composition, temperature, specific gravity, viscosity, suspended solids and any corrosion or erosion risk.
- Required duty: state flow per nozzle, minimum and maximum inlet pressure, operating cycle and acceptable turndown.
- Spray result: define pattern, angle, coverage width or diameter, stand-off distance, droplet requirement and allowable overspray.
- Installation: confirm thread standard, connection size, orientation, header spacing, available clearance and access for inspection.
- Materials and maintenance: match body, insert, seals and accessories to the fluid and environment; include filtration and cleaning requirements.
Where this nozzle type fits
Typical evaluation areas include greenhouses, livestock areas, humidification, cooling, dust control and landscape fogging. When comparing plastic fine misting nozzle with low-pressure fog nozzle, anti-drip plastic nozzle, hollow cone mist nozzle, select the pattern and construction that solve the actual process duty. A wider angle does not automatically mean better atomization, and a higher pressure does not automatically deliver the best coverage.
Engineering limits and installation checks
Published flow and spray data are normally based on defined test liquids and conditions. Viscosity, specific gravity, pressure loss, solids, temperature, nozzle wear, pulsation and nearby airflow can change field performance. Confirm the installed pressure at the nozzle—not only pump discharge pressure—and verify overlap or target coverage before finalizing a production header.
Information to include with an RFQ
Provide liquid properties, target flow, pressure range, spray angle or coverage, distance to target, material, connection, quantity, duty cycle and installation drawings. Jeltecn can use these inputs to compare the requested configuration with related spray nozzle application guidance and the complete industrial spray nozzle range.
Frequently asked questions
What determines the flow of plastic fine misting nozzle?
Flow depends primarily on the selected orifice and pressure differential, then must be corrected for liquid density, viscosity and the actual piping losses.
How should this nozzle be validated before production use?
Confirm the exact model and material, review the performance table, test coverage under representative conditions and document inspection or replacement criteria.
